The SKINPROJECT NEUTRALISING RED GEL is a strong neutraliser, and the third step in the SKINPROJECT range to be used alongside NANOPEEL EYE. This neutralising gel helps to control the depth of SKINPROJECT NANOPEEL EYE and will stop the frosting of the chemical peel. Following the NANOPEEL EYE treatment, this chemical peel neutralising gel will also ensure that the peeling ends and the skin stops reacting to the acid after the treatment is done.
Free virtual SKINPROJECT product training with your first order. Simply checkout and the virtual video will be added to your email confirmation for you to download.
Please note: you will need chemical peel certification to purchase this product.
Shop the full 4-step SKINPROJECT range for more innovative chemical peel products.
The SKINPROJECT Process Explained:
SKINPROJECT NEUTRALISING RED GEL has been developed to be used as the third stage in the SKINPROJECT process for NANOPEEL EYE. The NEUTRALISING RED GEL does not need to be used for NANOPEEL JESSNER or NANOPEEL SRT.
For the best results for your patients, follow SKINPROJECT’s simple 4-step process for rejuvenated, feel-good skin:
- Step 1 – Prep: Using SKINPROJECT NANOPEEL PREP, cleanse the skin to remove excess oils and sebum build-up.
- Step 2 – Peel: Select your choice of peel from, SKINPROJECT NANOPEEL SRT, SKINPROJECT NANOPEEL JESSNER, or SKINPROJECT NANOPEEL EYE, and apply a thin layer to the skin – following each product’s specific protocol. Leave for the maximum amount of time stated on the product information leaflet and the product will begin to crystallise. When the affected area is crystalised, the peeling process is complete.
- Step 3 – Remove/Neutralise: Once the peel has crystallised, use the SKINPROJECT REMOVER GEL to gently remove any chemical peel residue. The SKINPROJECT REMOVER GEL should only be used for NANOPEEL JESSNER and NANOPEEL SRT peels. For the NANOPEEL EYE peel, use the NANOPEEL NEUTRALSING RED GEL to top the frosting of the chemical peel.
- Step 4 – Nourish: Use the SKINPROJECT NANOPEEL NOURISH as the last step in your SKINPROJECT routine to help nourish and relieve the skin following a peel.
How to Use SKINPROJECT NEUTRALISING RED GEL 100ML:
Once the peeling procedure has reached the desired endpoint with SKINPROJECT NANOPEEL EYE, neutralise the product using the SKINPROJECT NEUTRALISING RED GEL. The peeling process shall be stopped with the SKINPROJECT NEUTRALISING GEL by applying it to the skin with a gloved finger or brush. The product will turn yellow on the skin to show active neutralisation. Remove and continue to apply the chemical peel neutralising gel until it remains red on the skin without changing colour. Then remove the neutralising gel with a gauze swab and follow the recommended protocol.
Treatment Areas:
To be used topically around the eye area.
Ingredients:
Sodium Bicarbonate, Red Phenol, Silica, Deionized Water, Propylene Glycol.
Contact Us
For assistance with an order or any further information on SKINPROJECT NEUTRALISING RED GEL, contact Fox Pharma for expert advice.
